EPBOT DIY Turn Any Shaped Stickers Into Reusable Resin Pins!

DIY: Turn Any Shaped Stickers Into Reusable Resin Pins!

Im not a big pin collector, but I recently fell for this new Star Wars set at Disney:

Trouble is, its $30. THIRTY DOLLARS.Nope nope nope.

In fact, there are a lot of new Star Wars pins with awesome designs:

So imagine my delight when, just a few days later, I spotted this $3 sticker book at Big Lots (yes, Big Lots) with stickers ofevery single new pin design:

The process is surprisingly easy, and yields sturdy plastic pins with a beautiful, pillowy dome on top:

Now, you KNOW you have stickers laying around the house that you want to turn into re-usable pins, right?

(I likeLittle Windows, but full disclosure: Fran over there is an Epbot reader, and has gifted me with both resin and tools in the past.)

I used these, but bar-type pins are great, too.

– (Optional) Adoming trayfrom Little Windows isextremelyhelpful, and only costs $3. Well worth it if you plan on doing a lot of pins!

Step 1)Peel and stick your stickers on to the tips of your doming tray:

The tray is covered in tiny plastic spikes, which allows the stickers to float above the tray – essential for resin doming.

If you dont have a doming tray, you can use something like a small measuring cup to support individual stickers:

The important thing is to have all the sticker edges up off your work surface, level, and not touching anything.

[UPDATE: Aha, several commenters have noted that a Perler bead tray could also work. Good call, guys!]

Step 2)Mix your 2-part resin, and allow it to rest an extra few minutes, so its slightly thicker. Then pour a little resin onto each sticker, allowing time for it to level itself and dome up slightly.

Believe it or not, the surface tension prevents the resin from going beyond the sticker edges – which is super cool to watch!

I should note Ive only tried doming with Little Windows resin, so I cant vouch for other brands. In theory they should work the same, but I hope some of you will chime in and let me know!

Go slowly pouring the resin, since you can always add more. For odd shaped stickers use a toothpick to help drag the resin into smaller areas, like the Tie Fighter wings and Reys belt on the stickers above.

Step 3)Once your stickers are domed as high as you like, cover them with a box or lid to keep dust off, and let them cure overnight.

Step 4)The next day, pop your domed stickers off the tray, and paint the back sticky sides with two coats of white craft paint.

Why? Because any white areas of your stickers may saturate with the resin, which darkens it like so:

Before and after two coats of white paint on the back side.

PRO TIP:You may be tempted to seal your stickers before adding the resin to prevent this bleed-through. If you do, DONT USE CLEAR PACKING TAPE. The resin wont stick to packing tape. Ask me how I know. (whoopsie)

This bleed-through only seems to be a problem in stickers with large amounts of white, so you may not need to paint yours at all. I decided to paint all of mine, though, just because it looks nice:

Dont worry if you get a little paint on the fronts; once it dries you can run a fingernail over the resin edge, and the paint pops right off.

Step 5)Mix another batch of resin, allowing it to set up a few extra minutes again, and repeat step 2 for the backsides of the pins. You dont need a doming tray this time, though, and you can use less resin, since you only want tosealthe backs, not dome them.

Step 6)About 20 minutes after pouring the resin,gentlypush your pin backs into place:

The resin will overlap the pin back and seal it in, making it incredibly strong.

These pins are super light, so you may want to use TWO tacks to keep them from spinning around on your lanyard. That, or use a bar pin, if the sticker is large enough.

And thats it! Once the backs have cured, your new pins are ready to decorate your jackets, bags, lanyards, etc.

As you can see, the doming works on all shapes, but tiny areas like those X-Wing tips are harder to reach with the resin, and therefore a bit more fragile. All of the other shapes worked great for me, though, and feel surprisingly strong.

Oh, I forgot to mention: several of these stickers originally had a thick white outline that I trimmed off before doming. You may want to do the same with some of yours, for a cleaner look.

Trimming your stickers has the added advantage of getting rid of any clunky copyright text – although some stickers, like this Stormtrooper one, are great as-is:

Im planning to finish up more of these, once I buy more pin backs!

Plus I have some larger art stickers from conventions Id like to try. Instead of pins, you could turn your domed stickers into charms, necklaces, earrings – so many fun possibilities!

I hope this inspires some of you to give resin doming a try! Happy crafting!

The doming treat looks like the things my kids use for perler beads. I cant wait to try this!

I meant doming tray ;). Also, I may have used the perler beads myself to make a tardis before giving them the rest of the pack….

I thought the exact same thing! Betcha it would work the same way.

You can totally use a pearler bead tray to dome with resin. Ive done it before. lol

So, I guess my idea wasnt that original after all. LoL. I came to make that suggestion too.

I need this in my life, thanks so much.

Wonderful idea! Thanks for testing this out. I wish my kiddos were young enough to still be exchanging Valentines in school – I would figure some way to use this.

Ahhhh, another craft I must try! Ive been resisting resin for a long time (ever since the penny desk tutorial) but I shall resist no longer!

Ive seen in another tutorial coating paper with Mod Podge before poring the resin on to help stop the discolouring.

Ooo! Ooo! My first thought was to try printed paper images cut to shape on a craft cutting machine, but I wondered if plain paper would work. Leighs Mod Podge idea is perfect, though! I know what were doing all snowed in weekend!!!

If you want to do printed images I recommend photo paper for resin. Its a little thicker. If you do use regular paper I would give it a few coats of mod podge (make sure you get the edges)because the resin will really discolor regular printer paper.

Out of curiosity (not living or traveling to Disney very often), how often do they rotate pins? Id be willing to splurge on a couple when Im in CA in Aug/Sept (since Im no good with most crafts), but Id like to know if theyd still be there, or if itd be a new batch by then. Just curious if anyone knows!

Those pins though look great Jen!!! Wish I had the time and craftiness to try some of your projects!!

I dont think that many of these Pins are limited edition, so they should still be there along with some new ones. I know Ive seen some of the ones since November and they are still there now.

I am still going to try making these resin pins they would make great Faire Favors ( it is common for people who work at my Renaissance Faire to make small pins as gifts to friends at the end of the season)

Someone do this with earrings and post it!!

Now I want to dig out my old grade-school sticker collection!!

I still have some fantastic holographic dinosaur stickers from when the first Jurassic Park came out and havent had the heart to put them on anything for fear that Ill scratch them up or theyll peel off; maybe THIS is their proper destiny. I wonder if the domed surface of the enamel would interfere with the effect, though. I may have to experiment.

Darn it, why didnt I bring my old sticker collection with me when I moved?! At least I know theyre safe until I get to them.

Ive domed a glitter sticker before, and the resin actually magnified the sparkly effect a little, which was awesome. So I *think* your holographic stickers should be fine!

Ohhh … That would be really awesome. Now I want to find some glittery stickers, too!

Ooh, I might want to try this with some of my art.

Any doming resin will work – make sure it says on the container that its specifically a doming resin. Resins like Envirotex Lite dont dome. Also, something like Diamond Glaze works better for sealing paper than Mod Podge, and make sure you get the edges, too.

Would you be able to suggest other types of doming resin?

Awesome! I have so many ideas since I collect stickers. Thanks, Jen!

Thanks Jen, this idea can be applied to so many projects! They make great magnets too, although I suggest putting the whole setup on a steel cookie sheet, or put metal rulers under them when inserting magnets to hold them down in place, otherwise they tend to migrate towards each other while setting. For thin or delicate designs you can also stick the sticker to white card stock first and then trim it out before Doming. This gives it greater stability and the same opacity as the white paint. For any double-sided Doming projects, make sure the first side is set up nice and hard before flipping to dome the backs, otherwise the tray or paper towel might make an impression. For this reason I sometimes dome the backs first, with the pins in them you could then just stick them in a piece of styrofoam or clay to dome the fronts. Lots of fun to be had!

This came at just the right time! Ive been trying to decide how to make pins for the sorting at my next Harry Potter party. This is perfect and Im going to try my hand at it. Itll also be a better keepsake than a laminated pin for my guests. Thanks 🙂

Ohh! Im going to have to try this with some of my own artwork!

Jen has discovered the secret to Puffy Stickers! Its like the late 80s in here! (Jen is truly outrageous. Ooooh, Jen.)

I wish I had your creativity! I love what you did with a simple book of stickers! (And I was in need of a little Star Wars fix tonight!) =)

Ooo…this is a neat idea. I often make stickers into magnets using sheet magnets (available cheap at home improvement stores where theyre sold as covers for heating/cooling vents) but you cant wear a magnet. So this is a cool idea that Im going to have to try.

Ive done this with stickers before, but I used Mod Podge Dimensional Magic. It worked great!

As someone who collects both stickers and buttons/badges, I am all over this project like a rash!

One question, though; is it smelly/fumey when its wet? My stupid migraines are sinus-based (botched adenoid op as a kid), and chemical fumes are a major trigger. Theres a lot of paints and adhesives that are off limits to me because of it. Its OK if its just a little whiffy, Ill make sure Im in a well ventilated area and all. that. But if its really strong, then Id really like to know before I invest money and enthusiasm.

Ah! I just thought of a good comparison– how stinky is this stuff compared to E-6000? Because that stuff does me head in!

I think I just fangirl squeed all over my desk.

Found some Star Wars sticker packs at Dollar Tree that have many of the designs youve shown us here. Theyre mostly circle or rectangle/square instead of unique shapes, but with the cost being $1 for 216 stickers, still a great deal in my book. If anyone goes looking for them, they were up by the registers in the impulse buy zone at my local store.

So it wont work on a paper print out..? 🙁 Resin will bleed rigth thru the paper and destroy it I think.. or have you tried it? Maybe thicker paper could work?

Do you know how amazing this tutorial is for Ita Bags???? The money people could save! I bought some stickers off of redbubble and was trying to figure out how to turn them into something I could put on my ita bag and wasnt having a ton of luck, but this tutorial SAVED me! Could you also make one showing how to create charms??

How did using red bubble stickers go?! I came from redbubble over here, and I think it would be awesome to make some big pins. Im just worried that based on the size, it might be too brittle and break easily if the edges get caught on something?

Will this doming work on embroidered patches?

Has anyone tried this doming on embroidered patches? Does it work?

DIY Floating Candles: The Best Method

Make Your Own Sliding Barn Door – For Cheap!

My Latest Cosplay: The BB-8 napping Jawa!

Right-click this image to save it, and then hyperlink it to on your blog sidebar. Voila! The world becomes a better place.

Things I Learned Today: Barbie Is Based On A Bache…

January Art Roundup: Warrior Disney Princesses, Av…

This Steampunked Back Brace Looks Like Gorgeous Co…

DIY: Turn Any Shaped Stickers Into Reusable Resin …

These 20 Adorable Art Plushies Will Make You Melt

Sad Crafting: Always Snape Tribute Necklace

Incredible Slo-Mo Video Of The Diagon Alley Dragon…

Virtual Disney Rides Make Good Therapy

Saying Goodbye To Disneys Osborne Lights (With EY…

Punk Leia Art Inspires Awesome Punk Leia Cosplay

Quick Craft: Better Mini Hot Air Balloon Baskets