How to Mix ICE Resin® from the Doming Kit

Make two marks on your calibrated measuring cup with a permanent marker. One line for you Part A Resin measurement and the other for your Part B Hardener. Make sure each mark is the same amount!

Snip the top off your bottles and put the dispensing caps on your Hardener and Resin bottles.

Pour Part A Resin carefully to the first line youve drawn on your measuring cup. Make note where it is on the line as it settles, be exact.

Now, pour Part B Hardener on top of Part A Resin to the second line you drew on your cup. Again, be exact.

You need to have very accurate measurements of equal amounts of resin to hardener to achieve a proper cure.

Mix at least 1/2 ounce or half of the measuring cup in order to have enough of both parts to fully activate its chemistry.

Mix well, yet gently with a folding motion, by scraping the bottom and sides for at least 2 minutes. Mix until there are no striations and two parts are fully incorporated.

Allow mixed resin to rest for five minutes before pouring for bubbles to dissipate.

Use your craft stick to drip ICE Resin® from the calibrated cup into your bezel or gently pour directly from cup into bezel.

Dome the top of the resin by carefully adding drops of resin until you see a dome appear.

This batch will be useful for 30 to 45 minutes. It will then begin to set and must be discarded. If you feel it heat up it should be discarded. All mixing materials and cups must be discarded after the batch life is over and should not be mixed with another batch.

When youre adding objects to your bezel, pour a thin layer of resin into the bottom of your bezel, add your items. You can move them around with your stir stick if necessary. Then continue pouring your resin to completely cover your objects. Come back after 20-30 minutes and poke around with a toothpick or peice of wire to make sure no bubbles are caught under your inclusions.

Mothers Day Coasters by Taylor Huizenga

Faux Birthstone Druzy Pendant by Kelly Krownowski

Susan Lenart Kazmer Demonstrates ICE Resin® Jewelry Wires

Mr. Mrs. Coasters by Debbie Tlach

ICE Resin® Blue Moon by Milagros Rivera

Connect with Ice Resin on Social Media.