What should notice when using ,custom heart bracelet

31 Views

quantity and other options like glowing and individual pack. The most importantly it shows what the bracelet looks like with your message or logo. It is direct way to check if wording, colors of bracelet and logo are correct. Make the mould or film. A mould is needed for debossed, embossed, colorfilled styles. We make a mould and set it in the machine, the high temperature of about 200℃ will solidify rubber into the sharp of bracelet. A mould is made from copper. A film is functioned like a mould but it is for printed wristband only. It transfer the ink to the surface of bracelet as logo and wording. Prepare the rubber material. A rubber bracelet is mainly made from silicone rubber, and some other accessories like curing agent which solidify the soft rubber, and Color masterbatch which makes bracelet colored. We will mix these material evenly in a blender. It comes out a ball of rubber. We need to measure it into blocks of almost same weight which as much as the weight of a wristband. Normal size of 202*12mm bracelet is weighted about 6g. Produce bracelets by the mould. As we mentioned before in 2nd and 3rd step, we will transfer  the blocks to bracelets by a set of moulding machine of high temperature. When it cool down, it gets the characteristic of a bracelet, smooth and strengthened. Edge cutting. A semi-product of rubber bracelet has rough edges, we have to cut it off. The rough edge is cut by machine. It will be good. Color the logo and wording. The bracelet comes out from moulding machine without colors on the logo and lettering. We have to fill the ink or print the ink on the bracelet. Different style has different way of printing. Clean the product. As the bracelet has static electricity, dust will be on the surface and hard to move off. So we need to clean the bracelet before packing. We usually wash it with water once. After washing, we will check the quality. Packing and delivery.We count the quantity by weighting. Normally packing will be 100pcs/bag, and 2500pcs/ctn.  Individual packing is available.    

w in dark rubber band bracelet can glow green or blue after absorbing strong light energy under the effect of phosphor which is very small amount added and green to human. The glow will fade gradually in about 3h depending on how much light it absorbs. It is the best one for night event. Such music show, night walk and so on. The logo can be same as regular debossed, embossed or printed on the glowing wristbands. After exposure to natural light, fluorescent light, and ultraviolet light, the phosphor can store the light energy, stop the light and release it slowly in the way of fluorescence, so the light can still be seen at night or in the dark, lasting for hours to more than ten hours. The luminescent powder can be automatically lit in the dark. The main component is rare earth, which belongs to inorganic materials. The luminous powder first absorbs a variety of light and heat, converted into light energy storage, and then automatically luminescence in the dark, by absorbing acustom heart braceletll kinds of visible light to realize luminescence. The product does not contain radioactive elements, and can be used indefinitely, especially for short wave visible light, sunlight and ultraviolet light (UV light) under 450 nanometers. Accept the ability. Here is the properties of the luminous powder. 1st short excitation time, long duration of luminous and afterglow, high brightness. 2ndvery stable physical and chemical properties, strong environmental adaptability, ordinary service life. 3rd safe and reliable, energy saving, green environmental protection.4th The particles are small, and the fineness and granularity are evenly distributed. In the actual life, people make use of the long time luminescence characteristics of night light powder to make a weak light source, and have special use in the military department. This material is applied to various kinds of switch signs on the aviation instrument, clocks, windowscustom heart bracelet, machines, and the handle of the door, and can also be pressed into various symbols and parts together with a variety of transparent plastic materials. Supplies (such as power switches, sockets, fishing hooks, etc.). These light-emitting components are illuminated at night, at night or by accidental blackouts, and after lightning, and it still continues to glow, allowing people to discern the direction of the surrounding and bring convenience to work and life. The ultra-fine particles of luminous materials can be added to textiles to make the colors more colorful. Children wearing luminous textiles can reduce traffic accidents. We use it to make the rubber band bracelet glow so as to contribute to night event.     bracelet-montre-siliconerubber-band-bracelet-maker

party wristbands