Tag Archives: jewelry

Easy Photo Resin Jewelry Tutorial

Ive dabbled with some photo resin jewelry making before but not entirely successfully. So whenFran Valera of Little Windowssent me some of her photo paper to try, I was most excited! Little Windows was thus named after the beautiful window-like effect created by putting sharp images of photos into resin molds. These are specially designed to reflect the light and yet let it pass through in just the right spots. This easy photo resin jewelry tutorial is for pendants and earrings.

Little Windows has bothone sided and double sided photo papers available. I just happen to have two inkjet printers available – a HP Envy 4500 and a Canon Pixma MG3520 for this review. Many modern printers can print photo paper although the HP Envy I have could not handle the thicker double sided paper so I had to use the Canon for that.

I also had on hand Canon Pixma photo paper to compare. Glossy is always recommended as matte finishes do look dull. I know because I also have the matte version.

I also tested outLittle Windows cropping software- the medium square and diamond shapes are free to use. It is very easy to use.

I uploaded my own photos of flowers taken at the Royal Botanical Gardens in Burlington, Ontario. You could also do landscape photos, pictures of your family and pets – these are some of the ideas!

The software automatically placed 8 images (they can be either the same or different photos) in two columns.

After saving the design template, printing is next. Every printer is different. This is what the HP Envy printer set up I chose looked like. If you have a gloss photo paper choice which I didnt have, then pick that.

The newer printers have an automatic sizing paper loader too.

I printed out on the test paper that came with Little Windows paper as well as on the single sided photo paper and my Canon photo paper – all on the HP Envy printer. Its clear from the results (see below) that you shouldnotuse ordinary paper – the images looked washed out and yellow.

I couldnt tell much difference between Little Windows paper and Canon paper when I first looked at them. But after I took the photo below, I could see that the dark pink rose in particular at the top looked more vibrant on the Little Windows paper as did the next flower below. The difference is very subtle though.

Cutting out the shapes is easy with the square shape. I prefer paper punches for round ones as it is more difficult to cut neatly around.

I also used one of Little Windows small square punches (they have a great selection) to cut out small square shapes for earrings. An alternative to the cropping software which will save paper is to prepare your own template and size the shapes to slightly larger than what you want and use punches.

If you dont have the right size paper punch, usethe small mold sets cutting template to crop a smaller image out of the medium square one.

I had to use my Canon printer to generate the double sided photo collection. It seems to print out slightly larger than my HP printer. But that slight difference did not seem to matter.

I simply printed the same flower collection on both sides of Little Windows double sided photo paper. I found photo register or printing precision on the other side was not quite right. A quick trim with the scissors soon fixed that. Again the slightly adjusted size did not matter once it was time to drop it into the mold.

My eyes dont do well squinting at the markings of plastic cups so I just weigh out the resin in the 2: 1 ratio for the Little Windows brand. One of Frans tip is to microwave Part A for 5-7 seconds before mixing. This does indeed get rid of more bubbles.

After mixing according to the directions, I poured the resin into themedium size square moldwhich I bought quite a while ago. There is no need for mold release as the inside of the mold already has it.I recommend their economical new medium silicone mold setwhich has all the shapes.

Then slip in the cut photos. Make sure to move the photo about to release any trapped photos underneath it.

Remove bubbles by lifting them up and out with a toothpick or pin. Remember to turn the mold around so you catch the bubbles that may be out of your sight.

I suspect there is some slight reaction with the photo pigments and resin so fine bubbles do still form. So check a few times in the first hour of curing to turf out any that appear. Inevitably there will be some remaining. So embrace them as part of the designs! The tiny ones look a little like glitter! Check outthe wood and resin rings of Secret Woodand see what I mean.

I used the butane lighter approach to try and get rid of the tiny bubbles but it failed probably because I did not heat up the resin enough. I think the only way to really remove them is to use a vacuum pump and chamber.

I usedthe small square mold set for the earrings- they also havethe new small silicone set for all the shapes in one. See what happened when I did not check properly :

The resin takes about 24 hours to cure. Always cover your resin work in progress to keep out the dust. I prefer my Ferrero Rocher chocolate box because the tray and cover is bigger than the clear box the molds come in. Besides, I need more chocolate!

Here is what the test 3 looked like – test paper, Little Windows paper and Canon paper. Again, when seen in a photo, the Little Windows paper looked the best. If you are planning to make jewelry to sell online and have to photograph your work, then Little Windows photo paper makes sense. Otherwise, other good photo paper (which dont bleed) will be fine.

The cured resin pieces are easier to remove from the silicone trays as you just peel them out. The plastic ones I used needed a twist or two before tapping them out.

Sand the edges. You can use various grades of wet-dry sandpaper in a tray of water which will contain the dust. Or you could use a power tool (seehow to use the split mandrel for power sanding).

Use E6000 to glue a pendant bail. Or a good 2 part epoxy adhesive. Ive found Super New Glue does not work well with resin.

The back of a double sided photo pendant will have part of the image covered with a bail. So think about a good background photo to use.

I used two types of small glue on bails for the earrings. I really like the pair on the left below usesthese silver plated bailswhich are orientated such that you dont need jump rings. Just attach directly to the ear wires. This makes for shorter dangles.

You can also dome up the double sided photos on both sides. This is a two step process as you need to let the first side cure before you do the second side. Then you can drill a hole for the jump ring for necklaces and earrings. I highly recommendLittle Windows silicone doming mat. Any accidental spills can later be peeled off. I didnt proceed with this method because I am saving it for an idea which popped into my head. Will share in the future.

Fran demonstrateshow to quickly make resin photo bracelets using molds as well as the doming method in this tutorial. You can also link up using her headpin wire wrap method.

Little Windows also offers a special discount code for readers of this blog :Use BG1516 for 15% off!

I had a lot of fun with making photo resin jewelry and plan to do more! So many ideas. I also enjoyed photographing the final project pictures. There aremore pictures on my Etsyas four of them are now available for sale.

I used natural light, my iPhone 6S with the ProCamera app and the Modahaus TS400 tabletop studio and the Steady Stand (overhead) for final product photography. The tutorial pictures were taken with the same equipment but with artificial lights in my windowless basement studio. Check out myHow to Photograph Jewelry Webinar.

I do receive a small fee for any products purchased through affiliate links. This goes towards the support of this blog and to provide resource information to readers. The opinions expressed are solely my own. They would be the same whether or not I receive any compensation.

Jewelry Making TipsWire JewelryTipsJewelry Business Tips

I get bubbles when I work with little windows resin in particular. It helps if you slightly warm the resin with a heat gun after mixing. It gets rid of most of the bubbles. however it decreases work time

Agreed. I usually need a longer working time so I dont heat the resin after mixing. But do try heating Part A as that is a great tip for bubble removal. Most of the tiny bubble formation in this tutorial I think is due to interaction with the photo paper pigments.

These are gorgeous Pearl! Just love how they turned out!

You know Im jealous of being able to do resin work. Maybe with global warming Ill eventually live in a climate where I can work with it.

Just collecting ideas – so far, my resin trials

have not been successful. Besides, you cant get a variety of brands in my country. But maybe one day…

This comment has been removed by a blog administrator.

Youre AWESOME! Thanks for the comment and feedback. You do make a difference on my blog!

Brings You the Best of Handmade JewelryMore About Me

How to Make Real Flower Resin Jewelry

How to Dry Dandelion Clocks and Flowers Using Crystal Cat Litter

How to Use Wire Grommets to Tighten Designs

Acrylic Dirty Pours Tutorials Using Polymer Clay and Canvas : Experiments with Different Pouring Mediums

Why Sourcing Bead Supplies from Charity Shops is a Good Idea

Learn how to take better pictures!!for my special webinar mailing list to learn when the next webinar will be and get information.

Jewelry Making Tutorials


Build Online Business For Your Craft (

Build Online Business For Your Craft

The keywords will be matched with the items name and description

With Christmas just around the corner. Kelly is here to show you how to make an easy and unique gift with the UV

In this tutorial you will learn how to make a (basic casting epoxy resin technique) with EasyCast Clear Casting Epoxy. This simple technique can be

Preparing Images in Pendants for Resin

Learn how to prepare your images and graphics inside collage pendants and bezel settings for filling with resin. Step by step directions on how to

Using Ice Resin, Molds and Color Dyes to Make Jewelry

Beadohliques Julie shows us how to use Jewelers Grade crystal clear Ice Resin, Resin Molds, Casting Epoxy Resin Color Pigment Dye, and some findings to

Learn how to make resin art pendants with Mark Nelson of RioGrande1944Visit for more!

Exploring Resin Jewelry-Making with Susan Lenart Kazmer (Download)

Click here to buy now!Now Available for Download! Join artist and best-selling author Susan Lenart Kazmer in 5 watch-and-learn episodes as she shows you step

How To Make Resin Gems (For Jewelry) Part 2

The second half of gemstone-making tutorial, showing how to put foil backings onto your gemstones. Feel free to visit blog at: h

How To Make Resin Gems (For Jewelry)

The titles pretty self-explanatory. Heres Part I on how to make Resin Gems. Feel free to visit prolady blog at: This video is share by:

Learn how to make a pendant with a doming resin top that magnifies an image! A Beads Baubles and Jewels project (see for more

UV Resin Jewelry Tutorial with John W. Golden

Digital Artist John W. Golden shows you how to make graphic jewelry using UV Resin, Ring Blanks and ordinary sunlight.Golden covers what can go wrong

. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.

Use of this Web site constitutes acceptance of the

DIY Lessons Learn Jewelry Making With Online Lessons, Videos and PDF Tutorials

Doming Stake forming and shapmetal jewelry tools WA 140-072

Made of hardened steel. This specially designed stake lets you expand your forming and shaping capabilities. Stake stands approximately 3 Inches tall. This specially designed doming stake lets you expand your forming and shaping capabilities. This Miniature Doming Stake has a shallow curved top with one sharp end and one tightly curved convex end. It can be used for forming bezels, rings and other small metal objects. Measures 3-1/8 (80 mm) long and 5/8 (16 mm) wide. Note: This item is shown in an steel tool holder(Will not fit the Fretz Miniature Stake Holder) that is not included with the stake; the holder is available separately

.- Measures 3-1/8 (80 mm) long and 5/8 (16 mm) wide.

Liquid Resin. Doming Epoxy Resin. Jewelry Grade Resin. Non-toxic Clear Epoxy Resin Kit. 6 oz. 2 part Doming Resin

Texturing Hammer Dual Face 9 Interchangeable Heads

Rolling Mill – Compact Flat – Jewelry Making – SFC Tools – 28-281

Texturing Hammer, Narrow Stripe/ Dimples,Texture On Metal, Jewelry Beading Tool. 302-011

1 – Jump Ring Opening Jewelry Tool, Solid Brass, Jump Rings, Tools, m008-3

Judikins 2 oz Diamond Glaze Judi Kins Pendant Sealer – Resin like doming

10 Piece Essential Dapping Set SALE

SALE: Ice Resin 8 ounce Doming Kit (1 kit)

Round Steel Bracelet Mandrel 1/4 thick walls for metal forming

T001-BEST SELLING TOOL! Soap Cutter Tool Soap Polishing Soap Trimmer Shaping Planer Wooden

Stencils Design Stencils for Enameling on Metal Eurotool

Jewelry Tools, Watchmakers, Art & Craft Supplies

Forming Stake Anticlastic and Synclastic Double Ended Jewelry metal tool WA 140-051

Nylon Hammer Wedge – Cone Head Doming Shaping & Forming Jewelry Plastic Mallet WA 302-050

Forming Stake Anticlastic Double Ended Size Large

Forming Stake Synclastic Double Ended Size Medium WA 140-050

Orders received by 2p.m EST of any business day (Monday thru Friday) will be shipped the same day. Orders received after 2p.m EST are shipped the following business day. Residents of FL are given the option of picking up their order at our facility in Doral, FL 33178. Payment will be required at time of pickup.


Tax (7%) will be collected for customers located in the state of Florida unless a resale tax certificate is send it to us previous the sale.

If you are not satisfied with the items you receive, we are proud to accept a return on any product in resalable condition for a full thirty days from the day we ship your package. Any merchandise found to be defective should be returned within 5 days of its receipt. Please be sure to include a description of the defect with any return. All return shipments must be shipped freight prepaid unless we specify otherwise

All returns must be issued a Return Merchandise Authorization (RMA) before they are shipped back to us.

To obtain an RMA, please contact us, you will receive a response within one business day with further instructions

• Monday thru Friday, 9:00am – 5:00pm

SALE Antique, Cast Iron Double Boiler, Water Bath, Bain-Marie, Dunlap Approved Tools, Sears, MetalWorking, Melt Metal for Jewelry Making,

CURVED BURNISHER for Smoothing Metals and Bezel Settings Around Stones – Jewelry Tools for Metal Work Bezel Tool Bezel Burnisher BRN-200.15

20 piece Iron steel Vintage Metal design stamp – jewelry tools – wax tools – metal clay tools

ULTRA Fine ROUND Nose Pliers – Make the Smallest Loops – Jewelry Tools for Metal Work PLR-491.10

1 piece Vintage Metal design stamp – jewelry tools – wax tools – metal clay tools- silver or gold

ICE RESIN, 16 oz Refill Kit, Resin and Hardener, Jewelers Grade Self Doming Clear Epoxy Resin No UV Lamp needed

Advantage Series Cowboy Boot Metal Design Stamp – Made In The USA – Available In 3 Different Sizes – For use on Stainless Steel – SGAD-21

Bracelet Bender- Made In The U.S.A- Perfect for Forming Strips into Cuffs- Quality Manufactured- Built To Last- SGO-630

9 in 1 Texturing Hammer SALE FREE SHIPPING

Bracelet Bender- Perfect for Forming Strips into Cuffs- Built To Last-SGSC910

Bracelet / Metal Shaping Block With 5 Nylon Shapers

One New Grey Flocked Plastic Multiple Compartment Jewelry Design Bracelet Bead Board Great Jewelry Making Tool

So you can DIY, DIY, and DIY some more.

Something went wrong. Please wait and try again in a few minutes.

Thanks for signing up. Welcome to Etsy Studio.

Set where you live, what language you speak, and the currency you use.Learn more.